Ace Fibreglass Supplies Your Local Expert for all Your FibreGlassing Needs Clean Up 6/18 Commerce St Warana Q4575 07 5493 9974 Trading Hours Mon-Fri 7am-5pm Sat 8am - Noon Closed Public Holidays and Long Weekends Introduction Resins   Clean Up Resin Additives Mould Release Fibre Reinforcements Fillers FAQ's Resin Coverage Guide Catalyst Usage Guide Acetone is primarily used as a cleaning solvent for removal of uncured resin from applicator equipment and clothing. It should NEVER be used for cleaning hands or any part of the human body. It is extremely flammable and readily evaporates at room temperature.  Never use Acetone to “thin down” any product. If thinning is required see “Styrene monomer” M.E.K is an abbreviation for Methyl Ethyl Ketone; a colourless, flammable liquid commonly used for spray gun clean up procedures.  M.E.K. is also used for cleaning prior to surface preparations.  This chemical should not be confused with Methyl Ethyl Ketone Peroxide. (M.E.K.P) Introduction  |Safety First | Resins |Clean Up | Resin Additives| Mould Release |Fibre Reinforcements | Fillers | FAQ's   | Resin Coverage Guide | Catalist Usage Guide Copyright © 2008 Ace Fibreglass Supplies. All rights reserved.