Ace Fibreglass Supplies Your Local Expert for all Your FibreGlassing Needs Mould Release 6/18 Commerce St Warana Q4575 07 5493 9974 Trading Hours Mon-Fri 7am-5pm Sat 8am - Noon Closed Public Holidays and Long Weekends Introduction Resins   Clean Up Resin Additives Mould Release Fibre Reinforcements Fillers FAQ's Resin Coverage Guide Catalyst Usage Guide   Wax Wax is used as a mould release agent.  The wet wax is applied to an applicator and applied in a circular motion, allowed to dry and then polished off with a clean soft rag. A clean soft rag must be used between each and all-subsequent layers of wax. It is imperative that all wax be polished from the mold as “fish-eye” or pre-release will be a problem on the fresh wax. Do not polish with high-speed buffers! PVA In liquid form is applied by cloth, brush or spray gun. The PVA is ideal for one off jobs or when “breaking in” in a new mould.  The product is water-soluble and is easy to clean off.  Care must be taken when using the product, as too little product will cause the mould and laminations to bond, too much can cause imperfections such as “gatoring “ (impressions of alligator hide) of Gel-coat. Introduction  | Safety First | Resins | Clean Up | Resin Additives | Mould Release | Fibre Reinforcements | Fillers |  FAQ's   |  Resin Coverage Guide  |  Catalist Usage Guide Copyright © 2008 Ace Fibreglass Supplies. All rights reserved.